Menu
Cart 0

Mineral Spa

Mineral Spa
  • $ 129.95


-

Chemical-Free Natural Spa Treatment

Found no place else on Earth this naturally occurring blend of minerals feeds a volcanic hot spring where the locals have been drinking and bathing in the water for generations. They say they never get sick and live an active, extremely long life.
Is your hot tub helping to make you healthy?
All of us got a box full of chemicals along with our spa, test kits to check for half a dozen different chemical levels, instruction books, and even a Video to show us what we have to do every day to maintain the water in our hot tub.
NO MORE!   Mineral Spa changes all that - for the better.
Just fill your spa and pour it in and from that moment on you can escape to your own private, peaceful mountain resort to enjoy the calm, soothing effect of a hot, healing mineral spring - without leaving your yard.
You bought your spa for comfort and relaxation - not to be a slave to toxic chemicals; testing, balancing, shocking and clarifying - right?
With Mineral Spa you can do just that!
The circulation of the water in your hot tub makes the mineral formula do its job; breaking down contaminants, eliminating odors and cleaning the water. All you do is let the spa run, the way it likes to, and it keeps itself clean - for six months, guaranteed!

You deserve to do less work, avoid the chemical hassle, and have more time to relax in hot, healing water that’s always clean, clear and ready to soak in - Now you can!

 

 

Mineral Spa Tests and Data

Based on all of the testing that has been done on the Mineral Spa formula from around the world, the product’s ability to reduce certain toxic substances [as testing indicates] is based on the amount of product added to the challenge water. It is safe to assume that most questionable fresh water sources such as rivers, wells, tap water, etc., would need between .5 and 1 mL of Mineral Spa per 1 L of water.

CHLORINE REDUCTION TEST REPORT

After addition of Mineral Spa to “Sodium Fluoride Solution” (concentrated OVER the standard levels of fluoride in drinking water), it was concluded that Mineral Spa trapped about 60% of the Fluoride ions in solution and only about 40% could be detected by ISE method 340.1.

Advanced Fluoride Reduction Test

After addition of Mineral Spa to “Sodium Fluoride Solution” at the proper ratios, it is concluded that Mineral Spa traps about 100% of the Fluoride ions in solution treated with 1 mL of Mineral Spa per 8 mg/L of Fluoride solution; at this point Fluoride ions were below the detectable limit of ISE method 340.1. Quote from the preparer: "Clarity™ has very intriguing properties, definitely a great product!"

Antibacterial Test

Addition of Mineral Spa to “Potable Water Coliform ERA Catalog #694; effectively kills the four types of bacteria present in the challenge water.

VOC Spiked Solution Test

When tested using EPA method 524.2, Mineral Spa is very effective when used to filter volatile organic compounds

Effectiveness of Filtration Test

When tested against Challenge water polluted at or above US EPA Drinking Water Standards the test delivered the following results:

  • Nitrate: reduced 11%
  • Copper: reduced 26%
  • Arsenic: reduced 62%
  • Mercury: reduced 91%
  • Lead: reduced more than 99%

Nuclide Radioactive Element Measurement

Upon testing of the concentrated mineral solution stored near Fukushima, Japan, Radioactive concentration was NOT detectable in the following nuclides:

  • Iodine 131
  • Cesium 134
  • Cesium 136
  • Cesium 137

Chloramine Reduction Test

After addition of Mineral Spa to “Challenge Water” it is concluded that chloramine in the challenge water is reduced nearly 100% after about 48 hours.

Hexavalent Chromium Test

When tested using EPA method 200.9 and Standard Method 3500 CR C, Mineral Spa is very effective at reducing Hexavalent Chromium.

CHLORINE REDUCTION TEST REPORT

Report #: 8-7-Cl

Date: 02/12/2008

Standard Performed: NSF-42 Chlorine Reduction Test (adapted)

Method Performed: Free Chlorine EPA 330.5

ENVIROTEK LABORATORIES, INC.

By: Jaime A. Young

EXECUTIVE SUMMARY

Mineral Spa Ionic Mineral solution manufactured by Clarity Water Products was tested by applying the protocol NSF Standard 42 for chlorine reduction. The solution prepared with .25 mL of the Mineral Spa Ionic Mineral solution dissolved in a 1000 mL volumetric flask with the challenge water (2.08 ppm of Free Chlorine) reduced the Free Chlorine in the challenge water by 100.0%.

INTRODUCTION

Mineral Spa Ionic Mineral solution manufactured by Clarity Water Products was tested by applying the protocol NSF Standard 42 for chlorine reduction. The challenge water was prepared by adding a chlorine standard to DI water in a 1000 mL volumetric to obtain a final concentration of free chlorine of 2.0 ± 0.2 mg/L (ppm); the solution was analyzed as per EPA method 330.5. After analyzing the free chlorine and other parameters of this challenge water, one quarter milliliter of the Mineral Spa Ionic Mineral concentrated solution was added to the volumetric flask containing the challenge water (2.08 ppm of Free Chlorine) mixed well and analyzed as per EPA method 330.5. The solution prepared at a concentration of 1:4000 in the challenge water, reduced the free chlorine in the challenge water by 100.0%. The level of chloride was tested in the challenge water before and after adding the Mineral Spa Ionic Mineral solution, the chloride level increased from 16 ppm to 550 ppm after adding the Mineral solution indicating that the free chlorine was converted to chlorides in the water.

MATERIALS

Clarity Water Products Mineral Spa

Chlorine Standard Solution

Spectrophotometer (UV, Visible range)

Reagents and chemicals necessary to perform EPA approved methods for drinking water analysis.

PROCEDURE

Prepare a water solution with free chlorine at a concentration of 2.0 ± 0.2 mg/L (ppm) by adding the appropriate amount of the chlorine standard to DI water. Analyze the final solution according to protocol NSF Standard 42. Add .25 mL of the Ionic Mineral Spa solution, mix well and analyze the final solution according to protocol NSF Standard 42.

RESULTS

Parameter Challenge Water Mineral Solution NSF Standard 42 range
pH 7.1 6.8 6.5-8.5
Total Dissolved Solids 110 118 80-120 ppm
Alkalinity 8020 80-120 (ppm)
Calcium 20 800 32-48 (ppm)
Fluorides 2.0 1 2.0 (ppm)
Chlorides 60 550 Not Specified
Free Chlorine 2.08 Not Detected2.0 ± 0.2

CONCLUSION

The Mineral Spa solution prepared at 1:4000 in the challenge water reduces the free chlorine in the challenge water by 100.0%, the minimum reduction amount required by the NSF Standard 42 is 50%; this product meets the requirements for chlorine reduction. The Ionic Mineral Spa solution also reduces the alkalinity and the pH of the water. The calcium and chloride levels increased by a significant amount after adding the Ionic Mineral solution to the challenge water. The reduction of the free chlorine level indicates that the free chlorine was reduced to chlorides. There is also a decrease in the amount of fluorides in the challenge water by 50.0%. The Ionic Mineral solution is a suitable source of essential minerals.

Notice:

The Mineral Spa lab reports are available to further substantiate the value and effectiveness of the Ionic Minerals. These reports are very technical and are proprietary to Clarity Water Products and are placed here for your information and demonstrate the credibility of the minerals and not to be distributed in any manor, written, electronically or otherwise. EPA ID # NJ01298 NJ DEP ID # 08012 PA DEP ID # 68-04402 NY ELAP # 11987

CONFIDENTIAL

Page 1 of 1

CLARITY WATER PRODUCTS FLUORIDE REDUCTION TEST REPORT

Report # 11-258-NaF

Customer Name: Clarity Water Products

Report Date: November 5, 2011

EXECUTIVE SUMMARY

A water solution prepared with a Sodium Fluoride concentration 8 mg/L of Fluoride was tested, Mineral Spa was added to the solution at a concentration of .25 mL, .5 mL, .75 mL, and 1 mL of Mineral Spa per liter of Sodium Fluoride solution and the solution was tested each time after about 15 minutes of adding the Mineral Spa solution. The concentration of Fluoride decreased each time until it was not detected by the EPA method 3.40.2.

INTRODUCTION

water solution prepared with a Sodium Fluoride concentration of 8 mg/L of Fluoride as per NSF/ANSI Standard 53 was tested following the EPA method 340.2, Mineral Spa was added to the solution at a concentration of .25 mL, .5 mL, .75mL, and 1 mL of Mineral Spa per liter of Sodium Fluoride solution and the solution was tested after about 15 minutes of adding the Mineral Spa solution. The concentration of Fluoride decreased each time until it was not detected by the EPA method 340.2.

REAGENTS AND LAB EQUIPMENT

  • Orion Dual Star ISE meter with Oakton Fluoride probe.
  • Oakton Sodium Fluoride standard 1,000 mg/L solution.
  • Hach Sodium Fluoride standard 100 mg/L.
  • Oakton Ion Strength Adjuster solution.
  • Mineral Spa solution.

PROCEDURE

A water solution was prepared using DI water and the Oakton Sodium Fluoride solution to obtain a concentration of 8 mg/L of Fluoride tested following the EPA method 340.2. One quarter mL of Mineral Spa was added to one liter of the Sodium Fluoride solution, mixed well and let it stand for about 15 minutes. The final solution was tested for Fluoride ions; the procedure was repeated after adding a total of one half mL, three quarters mL and one mL of Mineral Spa solution. The results are summarized in the table below. RESULTS

The Fluoride concentrations are summarized in the following table:

Parameter Tested Water Solution = Fluoride 7.94 mg/L

Mineral Spa .25 mL/L = Fluoride 3.73 mg/L

Mineral Spa 0.5 mL/L = Fluoride 2.98 mg/L

Mineral Spa .75 mL/L = Fluoride 1.51 mg/L

Mineral Spa 1 mL/L = Fluoride < 0.5 mg/L

CONCLUSION

The Mineral Spa traps about 100% of the Fluoride ions in solution at a concentration of 1 mL of Mineral Spa per 8 mg/L of Fluoride solution; at this point, the Fluoride ion was below the detection limit of the method 340.2.

Jaime A. Young

Lab Director

ANTIBACTERIAL TEST REPORT

  • Report #: 7-71
  • Date: May 14, 2007
  • Standard Performed: Antibacterial Test
  • Method Performed: m-ColiBlue-24
  • ENVIROTEK LABORATORIES, INC.
  • By: Jaime A. Young
  • Customer: Clarity Water Products
  • EXECUTIVE SUMMARY

    Mineral Spa Mineral solution was tested for antibacterial properties. Four control batches were prepared with four different types of Coliform bacteria in sterilized water and tested for Total Coliform/E. coli using the m-ColiBlue-24 method. Four similar Coliform batches were prepared and treated with the Mineral Spa solution in a 1:4000 proportion and tested again using the same Coliform method. Coliform bacteria were present in the control batches but absent in the treated batches.

    INTRODUCTION

    Mineral Spa solution manufactured by Clarity Water Products was tested for antibacterial properties. Four control batches were prepared with four different types of Coliform bacteria in sterilized water and tested for Total Coliform/e. coli using the m-ColiBlue-24 method. The four type of bacteria used were Escherichia coli, Enterobacter cloacae, Proteus mirablis, and Pseudomonas aeuginosa. Four similar Coliform batches were prepared and treated with the Mineral Spa solution in a 1:4000 proportion and tested again using the same Coliform method. Coliform bacteria were present in the control batches but absent in the treated batches.

    MATERIALS

    Mineral Spa Solution

    Potable Water Coliform ERA Catalog # 694 containing Escherichia coli, Enterobacter cloacae, Proteus mirablis, and Pseudomonas aeuginosa at about 500 colonies forming units/mL (CFU/mL)

    Sterilized water

    Incubator

    Reagents and chemicals necessary to perform EPA approved methods for drinking water analysis.

    PROCEDURE

    1. Remove the vials from the refrigerator and allow them to warm to room temperature.

    2. Place the sterilized water containers in the incubator at 35 to 37 ºC for approximately 30 minutes.

    3. After the 30-minute warming period, remove one sterilized water container from the incubator.

    4. Carefully open the sterilized water container.

    5. Open the appropriate bacteria sample vial and aseptically transfer the gelatin tablet into the sterilized water container and labeled accordingly.

    6. Properly dispose the empty glass vial and pouch.

    7. Reseal the sterilized water container that now contains the bacteria sample.

    8. Prepared all the samples as above.

    9. Place the inoculated samples into the incubator at 35 to 37 ºC for an additional 30 minutes to dissolve the samples.

    10. After the 30-minute dissolution period, gently shake each inoculated sample to ensure that the gelatin tablet has completely dissolved.

    11. Prepare the filter units and filter the first four samples as per method mColiBlue-24 (these are the control samples).

    12. Place the filter membrane in the Petri dish and incubate for 24 hours at 35 to 37 ºC.

    13. Add 0.25 mL of the Mineral Spa solution to the next four 100-mL sample prepared with the Coliform bacteria and repeat steps 11 and 12 (these are the treated samples).

    RESULTS

    Parameter Control Samples Mineral Spa Solution EPA MCL
    Escherichia coli Present AbsentAbsent
    Enterobacter cloacae Present AbsentAbsent
    Proteus mirablisPresentAbsentAbsent
    Pseudomonas aeuginosaPresentAbsentAbsent

    CONCLUSION

    The Mineral Spa solution prepared at 1:400 effectively kills the four types of bacteria present in the challenge water at about 500 CFU/mL.

    Jaime A. Young

    Lab Director

    Note: The Mineral Spa solution is not a sanitizer, pesticide, antiseptic or bactericide as defined by the EPA, FDA or any other Federal Agency and is not promoted, advertised or sold as such

    ENVIROTEK LABORATORIES, INC.

    120 White Owl Trail, Suite A

    Mullica Hill, NJ 08062


    PHONE 856-478-0010 www.enviroteklab.com

    EPA ID # NJ01298 NJ DEP ID # 08012 PA DEP ID # 68-04402 NY ELAP # 11987

    Page 1 of 2

    THEMAROX VOC SPIKED SOLUTION TEST REPORT

    Report # 11-195-VOC (VOC Spiked Themarox Solution tested after filtration system)

    Report Date: 10/18/2011

    Customer Name: Clarity Water Products

    Site Address: 445 East Chicago St. Coldwater, MI 49036

    Date Sampled: 10/10/2011


    Note: A solution prepared by diluting Mineral Spa 2.5 mL in 1000 mL of DI water was spiked with a VOC standard at a concentration of 20 ug/L; this solution was tested as is. The solution was exposed to direct sunlight for 2 days and then filtered through a mixed media water filter and tested as filtered solution. The results are summarized in the table above. After 48 hours and filtered through the mixed media, no Volatile Organic Compounds were detected (method detection limit = 0.5 ug/L).

    Jaime A. Young

    Lab Director


We Also Recommend

Sitemap